[Skip to Content]

soldering robot project

04 MAY 2015

DIY Soldering Robot Project Completed

The DIY soldering robot which we have been building in our spare time over the past few months is now working and we have been able to solder some test Raspberry Pi expansion board headers with the machine. Before starting...

07 APRIL 2015

Soldering Robot Designing the Motor Driver Board

For several months now we have been working on a new soldering robot to solder the 40 pin headers onto the raspberry pi expansion boards we build and sell on our AB Electronics UK website.  The mechanical side of the...

06 APRIL 2015

Soldering Robot Temperature Controller

With the mechanical side of the soldering robot well underway the next stage was to begin work on the electronics that will control it.  In a previous post I wrote about our decision to use the Antex TCS230 soldering...

25 MARCH 2015

Soldering Robot Solder Feeder

Today we finished the machining and building of the first of two solder feeders for our DIY soldering robot project. The main body of the feeder was milled from 10mm aluminium and the tensioner roller assembly was milled...

14 MARCH 2015

Soldering Robot Head Assembly

We have finished the soldering iron element slider system and stepper mount for the new soldering robot project. The soldering iron element slides on a pair or 6mm rails, drylin® accessories, precision aluminium shaft...

08 MARCH 2015

Antex TCS230 50W Temperature Controller Part 1

We are working on a new project to make a dual headed soldering robot to automate the soldering of the dual in line header pins on the Raspberry Pi expansion boards we design, manufacture and sell on our shop at www.abelectronics.co.uk We...