[Skip to Content]

Mk2 DIY Solar Panels Part Seven

Published on Tuesday 02 June 2009
Categories: Solar Power |

Putting it all together

Built the first of four panels today and got it installed on the roof. I am still waiting for the 12v 15amp cable roll for the other three panels, which I ordered over a week ago and the supplier isn't answering emails so it looks like I may have lost my money and will have to find it elsewhere.

The photo below shows the thicker tabbing wire used to join the rows of cells

tabbing wire used to join the rows of cells

[more]The glass was fitted to the panel using sealant and the alloy corners fitted to each side.

glass was fitted to the panel

The first panel completed and ready for fitting on roof.

first panel completed

The photo below shows the front of the house with the first of four panels fitted on the left.

front of the house with the first of four panels fitted on the left

Permalink


0 Comments



Leave a comment