Filed under Projects , Xbox 360
Watercooled Xbox 360 - First watercooling project to make an Xbox 360 much quieter.
Materials Used:
- 6mm Copper Plate for heat block
- Feser One Cooling Fluid - UV GREEN
- 3/8 Clearflex 60 Hose
- 12V Laing DDC-1T Pro 10W Pump
- XSPC 250mm Passive Reservoir (Silver) x 2
Total Materials and Parts Cost approx £120
Copper plate on milling machine
The copper plate was milled into the 2 halfs of the heat block with the water pipes soldered into the top of the block
The heat block was sealed and then bolted with 16 M3 x 12mm bolts
The heat block being checked for mounting pin alignment on the motherboard
Water reservoirs fitted to case
The completed 360. I was planning to fit the pump inside but it was easier to fit it on the back of the case for ease of filling and bleeding the system.
