Radio projects and Ham radio
Setting up the hardware and software for an AllStar Link Gateway using a Tait TM8110 which is a 25W PMR radio with a Raspberry Pi and USB sound card interface
Making a USB Programming Cable for Tait TM8000 series PMR Radios to use as Ham Radio repeaters
Installing a shielded case for our HackRF One software-defined radio
Adding an EMI shield to our HackRF One SDR
LED lights causing RF interference with Cateye Micro Wireless Bike Computer stopping the speed sensor from working
The Mastervolt Soladin 600 solar mains inverter has an issue where is it causing a lot of RF interference so we added additional RF Filtering and screening to try to reduce the unwanted radio emissions
Making a low-voltage power distribution board using Powerpole connectors and automotive blade fuses
Building a variable RF signal sampler to check the outputs on amateur (Ham) radios transmitters.
Using a Windows Phone and a Raspberry Pi to control our home's gas-powered central heating system
I purchased a used and very tatty Kent Hand Morse Key from eBay and restored it to a new condition
Problems with the programming / CAT cable for my Yaesu FT 817 transceiver.
Our mains solar inverter is causing RF interference on our ham radio transceivers so we put it in a metal case to improve the RF shielding
Using an XBee wireless module and a Raspberry Pi to control a Drayton Lifestyle LP522 central heating programmer.
Please support the blog and our projects by buying your Raspberry Pi expansion boards from our online store at abelectronics.co.uk.