Watercooled Xbox 360 - First watercooling project to make an Xbox 360 much quieter.

Materials Used:

• 6mm Copper Plate for heat block
• Feser One Cooling Fluid - UV GREEN
• 3/8 Clearflex 60 Hose
• 12V Laing DDC-1T Pro 10W Pump
• XSPC 250mm Passive Reservoir (Silver) x 2

Total Materials and Parts Cost approx £120 More...

External Connections for Xbox 360 Steering Wheel buttons and gear shifters

Adding six external phono plug connections for joypad buttons and gear shifter pads on the Xbox 360 wheel. These are to connect external gear shifters and hand brake systems.

Parts Required:

• Xbox 360 Steering Wheel
• Six phono sockets, screw mounting in the following colours: White, Black, Red, Blue, Green, Yellow.  More...

Changing the default plastic bearing in the official Xbox 360 steering wheel to a sealed cartridge bearing.

Parts Required:

• Xbox 360 Steering Wheel
• Sealed bearing race, 45mm internal, 75mm external, 16mm high. Available from RS Electronics, part no. 285-0778. www.rswww.com

An alternative bearing has been used on another mod by Prime NL who use the following: Serial : 61809-2RS1- Inner : 45 mm. - Outer : 60 mm. - Height : 8 mm. More...