When we purchased the milling machine which was later converted to be CNC we also purchased a Axminster SIEG C1 Micro Lathe, the lathe was ok for working with larger materials (over 3mm) but due to excessive vibration from the machine when it was running it wasn't possible to work smaller materials and get a consistent finish.

Recently we needed to make some small parts on the lathe and found that it wasn't possible so we decided to see if we can improve it!

Removal of the covers and replacement of various parts narrowed the source of the vibration to the standard pulleys which had over .5mm offset which caused a lot of issues and the motor mount which flexed a lot when under load.

The original machine before starting work.

More...